Improving the Thermal Performance of Vinyl-Framed Windows

TitleImproving the Thermal Performance of Vinyl-Framed Windows
Publication TypeConference Paper
Year of Publication1992
AuthorsFredric A Beck, Dariush K Arasteh
Conference NameThermal Performance of the Exterior Envelopes of Building V Conference
Date Published12/1992
Conference LocationClearwater Beach, FL
Call NumberLBL-32782

Over the last five years, vinyl-framed windows have gained an increased market share in both new and retrofit residential construction. This success has been mainly due to their low manufacturing cost and relatively good thermal performance (i.e., total window U-values with double glazing between 0.50 Btu/h ft2 °F [2.86 W/m2 K] and 0.30 Btu/h ft2 °F [1.70 W/m2 K]). Turning such windows into superwindows, windows with a U-value of 0.20 Btu/h ft2 °F (1.14 W/m2 K) or less that can act as passive solar elements even on north-facing orientations in cold climates, requires further significant decreases in heat transfer through both the glazing system and the frame/edge. Three-layer glazing systems (those with two low-emissivity coatings and a low-conductivity gas fill) offer center-of-glass U-values as low as 0.10 Btu/h ft2 °F (0.57 W/m2 K); such glazings are being manufactured today and can be incorporated into existing or new vinyl frame profiles. This paper focuses on the use of a state-of the-art infrared imaging system and a two-dimensional finite-difference model to improve the thermal performance of commercially available vinyl profiles and glazing edge systems. Such evaluation tools are extremely useful in identifying exactly which components and design features limit heat transfer and which act as thermal short circuits. Such an analysis is not possible with conventional whole-window testing in hot boxes where testing uncertainties with superwindows are often greater than proposed improvements.

LBNL Report Number